How to Replace a Kia Sportage Replacement Key
The key of many Kia models comes with the keyless entry feature built into. This key is similar to an remote control, and can be exchanged with a Kia dealer.
Key fobs can stop working for a variety of reasons, such as an empty coin battery, worn buttons signal interference, water damage and a faulty receiver module. Here are some suggestions on how to get your Kia Sportage replacement key working again.
How do you replace a remote key or a smartkey?
It doesn't matter if your Kia is equipped with an intelligent key, remote key, push to start key, or a regular non-transponder steel key the battery in these keys will eventually need replacement. This is particularly the case if your car displays a message indicating that the smart or remote keys are in poor condition.
Fortunately, it's an easy process. In order to replace the battery on the key fob take out the mechanical key from the slit on the back of the key fob. Next, lift the cover. A small screw will be inside the key fob to keep the battery in place. Take out the old battery by removing the screw using a small screwdriver. Then insert the new one and close the hole in the key fob.
Test the key fob by pressing the lock/unlock buttons. You're in good shape if the doors lock and unlock as expected. You can now make use of your Kia's hands-free lock/unlock feature whenever your fingers get chilly or you have to make errands in Brandon.
Note: Some key fobs (transponder chip or smart keys) might require their programming completed. This requires a computer which is available to the automotive locksmith or dealer. Other keys (non transponder keys made of metal) do not require programming. If your key has to be reprogrammed, then you must be aware of the key code number printed on the tag of the key code and record it in a secure location.
How do I replace a battery
If your Kia key fob is not responding when you press the lock or unlock button on the fob, it is a good indicator that the battery needs to be replaced. A low battery could cause other problems like the check engine light turning on or delayed cranking of the engine. It is quite simple to replace the key fob batteries with only two tools.
Make sure that you shut off your vehicle and close the doors before you begin. Find the small metal or a plastic piece at the bottom of the key fob. Jiggle it until the key pops out. The key can be placed inside the driver door handle to unlock your car.
To replace the key fob's battery, remove the cover at the rear and use a pry bar tool to loosen the latch holding the black negative battery cable. Remove the old battery and then orient the new battery to ensure that the "+" positive side faces you, and the "negative" negative side is facing the fob's electronic contacts. Push the new CR2032 battery straight into place and avoid excessive force to avoid damaging or bending the contacts on the metal.
Once the new battery is installed then turn the key fob off and then turn it on in the ignition repeatedly until the door locks cycle. Then you can test your Kia key fob to determine whether it's working again.
How to replace a smart key
There is a possibility of having an ordinary keyfob or Smart Key depending on the model of Kia Sportage. The smart key is equipped with an embedded mechanical key blade, while the standard keyfob does not. Both key fobs contain a battery that will eventually require replacement. It's an easy process that takes only two minutes.
Before you start before you begin, ensure that you're on a flat surface with good lighting and that your Kia is turned off. Also, keep in mind that there are tiny pieces inside the fob that can fall out if not vigilant.
The first step is to find the small release button on the back of the lower part of the fob. It could be an oval or circular slot. You can open the key fob by pressing the button.
Once you have the key fob open it is easy to remove the old battery, and replace it. The new battery is a CR-2032 that can be bought online or from your local auto parts store. When you're done, the key fob will allow you to lock the vehicle, unlock it, and then start your vehicle, even if it isn't running.
How do you replace a broken mechanical key
The Kia keyfob can be a fantastic convenience which allows us to lock or unlock our car with just pressing a button. Like all devices like a key fob, the Kia can have issues at times. There are kia ceed key fob www.g28carkeys.co.uk to resolve these issues and keep our key fobs in good working condition for the long term.
One of the most frequent problems is a weak or dead battery. This can cause the device to cease working or stop working at times. If this is the case, try replacing the battery with a fresh new one.
If this doesn't resolve the problem then try using a normal flathead screwdriver to open the casing of the fob's plastic. Be careful not to damage internal components, or scratch the plastic. Once the battery is removed and replaced with a brand new one.
Close and open the door using the mechanical key. (Every Kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob to verify that it's working as intended. If the fob isn't working, call an expert locksmith or dealer to solve the problem. To avoid lockouts in the future, make sure you get an emergency key that will work on all trunk and door cylinders.